S/V Giddy was a Santana 2023C that I used to own made by W.D. Schock Corp.
 
It is a water ballast boat weighing 1755lbs dry and 3055lbs sailing weight. The nice thing about the boat is the ease of trailering, rigging and launching: It is only 2500lbs loaded with gear and sits very low to the ground on the trailer.
 
Some specifications:

The features in the Santana that I like most are the quick setup (I average 15 minutes at the ramp!), the boom roller furling (infinite reef points), and the ability to drive the boat right up on the beach (this really is practical with the Santana, unlike other WB trailer boats' claims). The ease of setup and trailerability mean that the boat will get used more.
 
I did a lot of projects on the boat in the 3 years I had it. As you can see from the list below, I like working on the projects almost as much as sailing! (I heard that was a pre-requisite to boat ownership, anyway). Most of the projects here are specific to the way the Santana 2023C is set up, but a lot of them, or modified versions, are applicable to all trailer sailors....

THE PROJECTS:

Lockers

Aft Starboard Locker | Aft Port Locker | Bow Locker

Cabin

Cabin Doors | Under Berth Storage | Shelving | Privacy Curtains

Galley

Stove | Sink, etc. | Water

Trailering/Launching

Outboard Trailer Mount | Mast Crutches | Mast Raising | Retreiving Notes

Tables

Large Cabin/Cockpit Table | Small Cabin Table

Miscellaneous

Forward Hatch Screen | Sun Cover | Cockpit Extras | Swim Ladder | Tiller Extension | Bimini Top

Running Rigging

Mainsheet Attachment | Jibsheets | Boom Furling Handle | Other Furling Ideas | Spinnaker

Anchoring Ideas

Pulpit Anchor Holder | Improving Scope | Bow Chock

Electrical

Charger and Shore Power

Audio Excerpt From Most Projects

Project Audio